Kramer TP-590Rxr

24
TP-590Rxr - Operating the TP-590Rxr Remotely Using the Web Pages
Do not interrupt the process or the TP-590Rxr may be damaged.
5. When the process is complete reboot the device.
The firmware is upgraded.
8.6 The Authentication Page
The Authentication page lets you assign or change logon authentication details.
Figure 16: The Authentication Page
#
Item
Description
1
Activate Security Button
Click to enable/disable security settings. When
enabled, the valid username and password must
be provided to allow Web page access`1234
2
Change
Password:
Section
Current
Password box
Enter the current password
New Password
box
Enter the new password, (up to 15 printable ASCII
characters)
Retype New
Password box
Retype the new password
5
CHANGE button
Click CHANGE to save the new authentication
details