Kramer VP-550X

Kramer Electronics Ltd.
VP-550X - Operating and Controlling VP-550X
18
Setting Daily Reset Schedule
For units operating 24/7, the Daily Reset Timer may be used to automatically reset the unit
each day.
Note - This function reboots the unit. It does not reset any of the parameters.
To set a daily reset schedule:
1. On the front panel press MENU. The menu appears.
2. Select Advanced > press Enter and select Daily Reset.
3. Set the daily reset schedule.
Menu Item
Function
Daily Reset
Disable daily reset (Off, default) or enable daily reset (On).
Next Reset (h)
Set the number of hours before
the next reset.
Set for the “Next Reset” to fix the time
that the unit will be reset each day.
Next Reset (m)
Set the number of minutes
before the next reset.
After Power-Up
Define behavior following a power cycle:
Disable – The Daily Reset Timer is turned off.
Restart – The timer restarts when the unit is powered up (i.e., from then
onwards, the unit resets each day at the time that the unit is powered up).
Resume – The timer continues running after power returns (while
powered down, the timer does not run).
Daily Reset Schedule is defined.
Viewing Device Hours.
Lifetime shows the total number of hours that the machine has been in operation.
To view device hours:
1. On the front panel press MENU. The menu appears.
2. Select Advanced.
3. View Lifetime and view device hours.
Device hours are viewed.