Kramer VP-550X

Kramer Electronics Ltd.
VP-550X - Operating and Controlling VP-550X
17
Setting Ethernet Parameters
VP-550X enables defining the Ethernet parameters through the MENU front panel buttons.
To set the Ethernet :
1. On the front panel press MENU. The menu appears.
2. Select Advanced > press Enter and define the Ethernet parameters based on the
information in this table:
Menu Item
Function
IP Mode
Select Static IP (default) or DHCP.
Static IP Address
Enter to change the IP address.
Subnet Mask
Enter to change the subnet mask.
Default Gateway
Enter to change the default gateway.
TCP Port
Enter TCP port # (5000, by-default).
UDP Port
Enter UDP port # (50000, by-default).
IP
View the current IP address.
MAC ADDRESS
View the MAC address.
Link Status
View the link status.
Ethernet settings are defined.
Setting Lock Mode Functionality
VP-550X enables defining the function of the PANEL LOCK front panel button . For
example, the PANEL LOCK button can be defined to lock all the front panel buttons or only
the menu buttons.
To set the functionality of the LOCK front panel button:
1. On the front panel press MENU. The menu appears.
2. Select Advanced > Enter and select Lock Mode.
3. Set a panel Lock Mode base on the information in this table:
Menu Item
Function
All
All front panel buttons are locked.
All & Save
All front panel buttons are locked, and they remain locked after cycling
power.
Menu Only
Only the menu buttons are locked.
Menu Only &
Save
Only the menu buttons are locked, and they remain locked after cycling
power.
Note - To unlock the front panels, see Locking and Unlocking Front Panel Buttons.
on page 9.
Lock mode is set.
9