INSTALLATION 3
15
OPTIMASS 3000
www.krohne.com10/2015 - 4001593002 - MA OPTIMASS 3000 R02 en
3.4 Installation conditions
3.4.1 Plastic Inserts
3.4.2 Two hole mounting
Figure 3-1: Base plate plastic inserts
CAUTION!
The four mounting holes in the meter base plate are fitted with plastic inserts. Do not remove the
inserts prior to installation.
Figure 3-2: Using two holes to mount the meter
1 It is recommended that ALL four mounting holes are used to secure the meter.
2 It is possible to secure the meter using only two of the mounting holes.
MA_OPTIMASS_3000_en_151014_4001593002_R02.book Page 15 Wednesday, October 14, 2015 1:20 PM
To Next Page
Loading...
