KROHNE OPTIMASS 3000 - Operating Conditions

6 TECHNICAL DATA
28
OPTIMASS 3000
www.krohne.com 10/2015 - 4001593002 - MA OPTIMASS 3000 R02 en
Temperature
TemperatureTemperature
Temperature
Accuracy ±1°C / ±1.8°F
Operating conditions
Maximum flow rates
Maximum flow ratesMaximum flow rates
Maximum flow rates
01 20 kg/h / 0.733 lbs/min
03 130 kg/h / 4.766 lbs/min
04 450 kg/h / 16.5 lbs/min
Ambient temperature
Ambient temperatureAmbient temperature
Ambient temperature
Compact version with Aluminium
converter
-40...+60°C / -40…+140°F
Extended temperature range: 65°C / 149°F for some I/O options. For more
information contact manufacturer.
Compact version with Stainless Steel
converter
-40...+55°C / -40…+130°F
Remote versions -40...+65°C / -40…+149°F
Process temperature
Process temperatureProcess temperature
Process temperature
Stainless Steel / Hastelloy® -40…+150°C / -40…+302°F
Nominal pressure at 20
Nominal pressure at 20Nominal pressure at 20
Nominal pressure at 20°C / 68
C / 68C / 68
C / 68°F
FF
F
Measuring tube
Measuring tubeMeasuring tube
Measuring tube
Stainless Steel -1…150 barg / -14.5…2175 psig
Hastelloy® -1…300 barg / -14.5…4351 psig
Outer casing
Outer casingOuter casing
Outer casing
PED / CRN approved -1…30 barg / -14.5…435 psig
For operating pressures >30barg / 435psig, a burst disc is mandatory
Fluid properties
Fluid propertiesFluid properties
Fluid properties
Permissible physical condition Liquids, gases
Permissible gas content (volume) Contact manufacturer for information.
Permissible solid content (volume) Contact manufacturer for information.
Protection category (acc. to EN 60529) IP 67, NEMA 4X
Installation conditions
Inlet runs None required
Outlet runs None required
Materials
Stainless Steel meter
Stainless Steel meterStainless Steel meter
Stainless Steel meter
Measuring tube Stainless Steel 316L (1.4435)
Process connections Stainless Steel 316L (1.4435)
Baseplate Stainless Steel 316L (1.4435)
Outer casing Stainless Steel 316L (1.4435)
Hastelloy
HastelloyHastelloy
Hastelloy® meter
meter meter
meter
Measuring tube Hastelloy® C-22
Process connections Hastelloy® C-22
Baseplate Stainless Steel 316L (1.4435)
Outer casing Stainless Steel 316L (1.4435)
MA_OPTIMASS_3000_en_151014_4001593002_R02.book Page 28 Wednesday, October 14, 2015 1:20 PM