TECHNICAL DATA 6
29
OPTIMASS 3000
www.krohne.com10/2015 - 4001593002 - MA OPTIMASS 3000 R02 en
Heating jacket version
Heating jacket versionHeating jacket version
Heating jacket version
Heating jacket Stainless Steel 316L (1.4435)
All versions
All versionsAll versions
All versions
Sensor electronics housing Stainless Steel 316L (1.4409)
Junction box (remote version) Die cast Aluminium (polyurethane coating)
Optional Stainless Steel 316 (1.4401)
Process connections
Threaded
ThreadedThreaded
Threaded
NPT-M ¼¨
Flange
FlangeFlange
Flange
DIN DN15 / PN40…63
ASME ½¨ / ASME 150…600
JIS 15A / 20K
Hygienic
HygienicHygienic
Hygienic
Tri-clover ½¨
Tri-clamp DIN 32676 DN10
Electrical connections
Electrical connections For full details, including: power supply, power consumption etc., see
technical data for the relevant converter.
I/O For full details of I/O options, including data streams and protocols, see
technical data for the relevant converter.
Approvals
Mechanical
MechanicalMechanical
Mechanical
Electromagnetic compatibility (EMC)
acc. to CE
Namur NE 21/5.95
2004/108/EC (EMC)
2006/95/EC (Low Voltage Directive)
European Pressure Equipment Directive PED 97-23 EC (acc. to AD 2000 Regelwerk)
Factory Mutual / CSA Class I, Div 1 groups A, B, C, D
Class II, Div 1 groups E, F, G
Class III, Div 1 hazardous areas
Class I, Div 2 groups A, B, C, D
Class II, Div 2 groups F, G
Class III, Div 2 hazardous areas
ANSI / CSA (Dual Seal) 12.27.901-2003
ATEX (acc. 94/9/EC)
ATEX (acc. 94/9/EC)ATEX (acc. 94/9/EC)
ATEX (acc. 94/9/EC)
OPTIMASS 3300C non Ex I Signal outputs without heating jacket / insulation
OPTIMASS 3300C non Ex I Signal outputs without heating jacket / insulationOPTIMASS 3300C non Ex I Signal outputs without heating jacket / insulation
OPTIMASS 3300C non Ex I Signal outputs without heating jacket / insulation
Ex d connection compartment II 2 G Ex d [ib] IIC T6....T1
II 2 D Ex tD A21 IP6x T160°C
Ex e connection compartment II 2 G Ex de [ib] IIC T6....T1
II 2 D Ex tD A21 IP6x T160°C
MA_OPTIMASS_3000_en_151014_4001593002_R02.book Page 29 Wednesday, October 14, 2015 1:20 PM
To Next Page
Loading...
