Krone Comprima V 180 XC - Malfunctions on the Central Chain Lubrication System

Malfunctions - Causes and Remedies
274
Pos: 58.9 /Übersc hriften/Übersc hriften 2/P-T/ SStörungen an der zentralen Ke ttenschmieru ng @ 35\mod_12 56199185431 _78.docx @ 327048 @ 2 @ 1
16.2 Malfunctions on the central chain lubrication system
Pos: 58.10 /BA/Stör ungen - Ursa chen und Be hebung/Rundball enpressen/Ta bellarische A uflistung Kettensch mierung @ 2 40\mod_1395 153485543_7 8.docx @ 18918 08 @ @ 1
Malfunction
Possible cause
Remedy
Low oil consumption
Low pressure
Pump works with difficulty, dirt in the
pump area
• Clean
Pump is not pressed to a full stroke
• Adjust according to the operating
instructions
Pump valve does not close correctly
• Remove and clean or replace
Oil is too thick
• Replace with recommended oil
System contaminated
• Clean or replace all measuring
valves
Oil consumption too high
Main pipe torn
• Repair or replace
Oil too thin
• Drive with thicker oil
• Reduce the pump stroke
Machine is dry
No pressure
Pump not running
• Repair, adjust or replace
Main pipe torn
• Repair or replace
System has no oil
• Vent the system (see chapter
Central chain lubrication system)
System blocked
Dirt
• Clean the system and clean or
replace all measuring valves.
Pipe jammed
• Repair or replace
Pump is not pressed to a full
stroke.
Oil is too thick, nozzles clogged.
• Replace with recommended oil
• Clean nozzles
Pos: 58.11 /La yout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226 _0.docx @ 4 165 @ @ 1