7 Terminal menus
7.3 Selecting a menu Level
36
RP701-10 , RP701-11 , RP701-20 , RP701-21 , RP701-30 , RP701-31 , RP701-40 , RP701-41 , RP701-51
Comfort 1.0_en
Icon Designation Explanation
Arrow pointing to the left Move to the left in order to select some-
thing.
Disk Save the setting.
ESC Leave menu without saving.
By pressing the key longer, the previously
viewed working screen is called up.
DEF Reset to factory setting.
Sensor test Quick access to sensor test (sensors relev-
ant for this menu)
Actuator test Quick access to actuator test (actuators
relevant for this menu)
Disk The mode or value is saved.
Plus Increase the value.
Minus Reduce the value.
Arrow pointing to the right Display next mode.
Arrow pointing to the right Display previous mode.
7.3 Selecting a menu Level
To bring up the menu level from the working screen, press
.
Æ The display indicates the menu level.
To return from the menu pages to the main menu:
Press
until the main menu is displayed.
For an overview of the menus: refer to page34.
7.4 Selecting a menu
Calling up menu
The menus are selected depending on used terminal (touch sensitive or not touch sensitive).
To Next Page
Loading...
