Safety
21
Pos: 15.11 /BA/Sic herheit/Hydr aulikanlage @ 2\ mod_12035036 91986_78.doc x @ 66225 @ 2 @ 1
4.8 Hydraulic system
1 The hydraulic system is pressurised!
2 When connecting hydraulic cylinders and motors, make sure the hydraulic hoses are
connected as specified!
3 When connecting the hydraulic hoses to the tractor hydraulics, make sure that the
hydraulics of both the tractor and the implement have been depressurized!
4 In the case of hydraulic connections between tractor and machine, the coupling sleeves
and plugs should be marked to ensure a proper connection! If the connectors are
interchanged, the function will be reversed (e. g. raising/lowering) - Risk of accident!
5 When searching for leaks, use suitable aids to avoid the risk of injury!
6 Liquids escaping under high pressure (hydraulic oil) can penetrate the skin and cause
serious injury! Seek medical help immediately should injuries occur! Danger of infection!
7 Before working on the hydraulic system, depressurise the system and switch off the
engine!
Pos: 15.12 /Übersc hriften/Überschrif ten 2/P-T/R eifen @ 0\mod _11973579956 67_78.docx @ 18075 @ 2 @ 1
4.9 Tyres
Pos: 15.13 /BA/Sic herheit/Reifen @ 0\mod_1 195646435716_ 78.docx @ 1346 @ @ 1
1 When working on the tyres, make sure that the implement is safely lowered and secured
against rolling (wheel chocks).
2 Installing wheels and tyres requires adequate knowledge and suitable tools!
3 Repair work on the tyres and wheels should be done by specially trained personnel using
appropriate installation tools only!
4 Check tyre pressure regularly! Inflate the tyres to the recommended pressures!
5 Check the wheel nuts periodically! Missing wheel nuts can result in a wheel falling off and
the machine tipping over.
Pos: 15.14 /BA/--- ------ ------Seitenumbruch---- ------------ @ 0\m od_1196175311 226_0.docx @ 4 165 @ @ 1
To Next Page
Loading...
