What to do if I can not close the tap cover of my Krups Kitchen Appliances BeerTender?
If you cannot close the tap cover on your Krups BeerTender, it's likely that the BeerTender Keg tap isn't inserted correctly. Remove the BeerTender Keg tap and re-fit it.
What to do if the control display shows an increasing temperature on my Krups Kitchen Appliances BeerTender?
If the control display of your Krups BeerTender shows an increasing temperature, it might be because a warm keg was installed in a cold appliance. Allow the system to compensate for the temperature change. The displayed temperature should start decreasing after a maximum of one hour.
What to do if the temperature indicator on my Krups Kitchen Appliances never reaches a ready-to-drink level?
If the temperature indicator on your Krups BeerTender never reaches the ready-to-drink level, the appliance might be exposed to excessive heat or direct sunlight. Use the appliance indoors and ensure the ambient temperature does not exceed 30°C.
Why is beer flowing out too slowly from my Krups Kitchen Appliances BeerTender?
If the beer is flowing too slowly from your Krups BeerTender, it's likely that the tap handle isn't fully open. Make sure to open the tap completely.
Why won't my Krups BeerTender turn on?
If your Krups kitchen appliance isn't turning on, ensure it is properly connected to the mains power supply. If it is not connected, connect the appliance to the power supply.
What to do if no beer is being dispensed from my Krups Kitchen Appliances BeerTender?
If no beer is coming out of your Krups BeerTender, the keg is likely empty. The last level of the volume indicator will be blinking. Replace the empty keg with a new one.
What to do if my Krups Kitchen Appliances BeerTender is dispensing warm beer?
If your Krups BeerTender is dispensing warm beer, the keg likely hasn't been chilled sufficiently. Allow the keg to cool in the refrigerator for about 12 hours to reach the proper serving temperature.
Instructions for user safety and proper use.
Advice on keeping instructions and seeking help.
Specifies the appliance's purpose and domestic setting.
Key factors for optimal draft beer quality and hygiene.
Methods and duration for chilling the beer keg before use.
Guidance on unpacking and placing the appliance.
Safety precautions and procedure for plugging in the appliance.
Step-by-step instructions for placing a beer keg inside.
Explanation of the appliance's display indicators.
Details on the sounds the appliance makes during operation.
How to prepare a glass for perfect draft beer.
Technique for pouring beer and avoiding excessive foam.
Letting the beer settle in the glass.
Characteristics of an excellent draft beer.
How to clean the drip tray and grate after each use.
Regular cleaning of the cooling chamber and tap cover.
General| Type | Beer Dispenser |
|---|---|
| Cooling System | Thermoelectric |
| Capacity | 5 Liters |
| Brand | Krups |
| Model | BeerTender |
| Category | Kitchen Appliances |
| Voltage | 120 V |
| Frequency | 60 Hz |
| Color | Black, Silver |
| Compatible Kegs | Heineken, Newcastle Brown Ale |
| Weight | 13.2 pounds |
| Temperature Indicator | LED |
| Compatibility | 5L Heineken DraughtKeg, 5L BeerTender Kegs |
| Material | Plastic |
To Next Page
