KSB CPK - Page 20

CPK
Sr. Product Ingredients Disposal Methods
1. Pumps Paint : Pump body, Base frame Sludge to be disposed through authorised re processor
Non ferrous parts :
a) Impellers, Diffusers
b) Bushes
c) Stage sleeves
d) Thrust plate To be disposed through authorized re-processor
e) Wearing ring
f) Coupling Guard
g) Brg. Guard
Rubber / Plastic Parts :
a) Cover for NRV
b) Plastic cap To be disposed through authorized re-processor
c) Nozzle blanking
d) Cooling Fan
2. Motor Paint : Motor body, Rotor Sludge to be disposed through authorised re-processor
Non ferrous parts :
a) Support bushes
b) Copper sticks and stampings To be disposed through authorized re-processor
c) Balancing rings
d) Winding wire with varnish
Rubber / Plastic Parts :
a) Oil seal
b) Sand guard To be disposed through authorized re-processor
c) Notch keys, slot insulators
d) Overhang protection pipe
Annexure IV - Environment Protection - Pruduct Disposal after useful life
Products manufactured by KSB Pumps are designed with utmost care for environmental protection. Innovative designs and
wide product range takes care of specific customer requirements reducing material and electrical energy consumption.
Product materials are recyclable. Our customers are educated with environment friendly methods of disposing product ingredients
at the end of their useful life. Please find herewith methods of disposing used pump ingredients.
Environment Protection measures during product disposal
17