KSB PumpDrive - Page 110

Parameter Description Factory
setting
Setting Unit Access level Possible settings
EP MP Min. Max.
3-1-5-1 PDrive -> HMI
Transfer parameter
settings from
PumpDrive to HMI
1 1 - - - Customer OFF
Start
3-1-5-2 HMI -> PDrive
Transfer parameter
settings from HMI to
PumpDrive
1 1 - - - Customer OFF
Start
3-1-5-3 Trip Reset
Reset trip status of
PumpDrive
1 1 - - - All OFF
Start
3-1-5-4 Upload BIN File
Upload binary file
1 1 - - - Customer OFF
Start
3-1-5-5 Back Fac Settgs
Reset to factory
settings
1 1 - - - Customer OFF
Start
3-1-5-6 System Reboot
Restart system
1 1 - - - Customer OFF
Start
3-1-5-7 Pump Start
Pump start
1 1 - - - All OFF
Start
3-1-5-8 Pump Stop
Pump stop
1 1 - - - All OFF
Start
3-1-5-9 HMI->all PDrive
Transfer settings
from HMI to all
PumpDrives
1 1 - - - Customer OFF
Start
3-1-5-10 System Stop
Stop system
1 1 - - - All OFF
Start
3-1-5-11 System Start
Start system
1 1 - - - All OFF
Start
3-1-5-12 Pp Change-
over Trigger pump
changeover
manually
1 1 - - - All OFF
Start
3-1-6 Password
Submenu for
entering the
password
- - - - - - -
3-1-6-1 Login
Enter customer
password for login
0 0 - - - All -
3-1-6-2 Service Login
Enter service
password for login
0 0 - - - Service -
3-1-6-3 Factory Login
Enter factory
password for login
0 0 - - - - -
3-1-6-4 Customer Passwd
Change password
for customer access
level
0 0 0 9999 - Customer -
3-1-6-5 Enable Protect
Activate/deactivate
password protection
at customer level
1 1 - - - Customer Disabled
Enabled
3-1-6-6 Service Passwd
Change password
for service access
level
- - 0 9999 - Service -
10 Parameter lists
110 of 162
PumpDrive