Table 131: Accessories – Profibus branch switch
Description Design Mat. No. [kg]
Profibus branch switch For connecting PumpDrive to Profibus
networks via IP 66 spurwithout
terminating resistor
The Profibus segment remains
operative if PumpDrive fails.
Cable entry: EMC cable gland M16,
Tension spring connection
0.5 to 1.5 mm², Supply voltage:
+24 V DC +/- 10 %, Current input on
supply side +24 V DC le = 10 mA
+ 15 % for bus load up to
32 subscribers, Spurs (LS) up to
1500 kBit/s, Single spur, max. 0.25 m,
Maximum sum of all spurs, 6.60 m per
DP segment, IP 66 enclosure,
Dimensions in mm, see illustration
Operating temperature -40 to 85 °C
01150961 0.3
Profibus branch switch For connecting PumpDrive to a
Profibus network via a spurwith
terminating resistor (last bus
subscriber)
The Profibus segment remains
operative if PumpDrive fails.
Cable entry: EMC cable gland M16,
Tension spring connection
0.5 to 1.5 mm², Supply voltage:
+24 V DC +/- 10 %, Current input on
supply side +24 V DC le = 10 mA
+ 15 % for bus load up to
32 subscribers, Spurs (LS) up to
1500 kBit/s, Single spur, max. 0.25 m,
Maximum sum of all spurs, 6.60 m per
DP segment, IP 66 enclosure,
Dimensions in mm, see illustration
Operating temperature -25 to 70 °C
01150962 0.3
12 Purchase Order Specifications
PumpDrive
151 of 162
To Next Page
Loading...
