5.4.3 Electrical connection
5.4.3.1 Removing the housing cover
DANGER
Contact with live components
Risk of fatal injury due to electric shock!
▷ Never remove the upper housing part from the heat sink.
▷ Mind the capacitor discharge time.
After switching off PumpDrive, wait five minutes until dangerous voltages have
discharged.
The housing cover comprises a V-shaped cover for the power and motor connection
cable connections and an L-shaped cover for the control cable connection.
1. Remove the cross recessed head screws on the C-shaped cover.
2.
Remove the L-shaped cover.
1. Remove the cross recessed head screws on the V-shaped cover.
2.
Remove the V-shaped cover.
1. Remove the cross recessed head screws on the control panel or blanking plate.
2.
Remove the control panel or blanking plate.
L-shaped cover
V-shaped cover
Control panel/blanking
plate
5 Installation at Site
PumpDrive
25 of 162
To Next Page
Loading...
