To Next Page

To Previous Page

15 ELECTRICAL SYSTEM 101

15.11 Changing the speedometer battery

Preparatory work

– Remove the headlight mask with the headlight. ( p. 98)

602746-10

Main work

–

Remove screws



– Pull the speedometer upward out of the holder.

602748-10

–

Using a coin, turn protection cap



all the way counterclockwise and remove it.

–

Remove speedometer battery



– Insert the new battery with the label facing upward.

Speedometer battery (CR 2430) ( p. 125)

– Check the O-ring of the protection cap for correct seating.

602747-10

–

Position protection cap



and turn all the way clockwise using a coin.

– Press any button on the speedometer.

The speedometer is activated.

– Position the speedometer in the holder.

– Mount and tighten the screws with washers.

Finishing work

– Refit the headlight mask with the headlight. ( p. 98)

– Check the headlight setting. ( p. 100)

– Set kilometers or miles. ( p. 20)

– Set the speedometer functions. ( p. 21)

– Set the clock. ( p. 21)

Questions and Answers:

Need help?

Do you have a question about the KTM 200 XC-W and is the answer not in the manual?

KTM 200 XC-W Specifications

General