EasyManuals Logo

KTM 200 XC-W User Manual

KTM 200 XC-W
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #118 background imageLoading...
Page #118 background image
19 CLEANING, CARE 116
19.2 Checks and maintenance steps for winter operation
Info
If the motorcycle is used in the winter, salt can be expected on the roads. Precautions need to be taken against road salt corro-
sion.
If the vehicle was operated in road salt, clean it with cold water after riding. Warm water would enhance the corrosive effects of
salt.
401060-01
Clean the motorcycle. ( p. 115)
Clean the brakes.
Info
After EVERY trip on salted roads, thoroughly wash the brake calipers and
brake linings with cold water and dry carefully. This should be done after
the parts are cooled down and while they are installed.
After riding on salted roads, thoroughly wash the motorcycle with cold water
and dry it well.
Treat the engine, swingarm and all other bright and zinc-plated parts (except for
the brake discs) with a wax-based corrosion inhibitor.
Info
Corrosion inhibitor is not permitted to come in contact with the brake discs
as this would greatly reduce the braking force.
Clean the chain. ( p. 72)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 200 XC-W and is the answer not in the manual?

KTM 200 XC-W Specifications

General IconGeneral
StarterElectric Starter
Transmission6-speed
Fuel SystemKeihin PWK 36S AG
IgnitionKokusan
Rear SuspensionWP Xplor PDS shock absorber
Front BrakeDisc brake
Rear BrakeDisc brake
Ground Clearance370 mm
Seat Height960 mm
Engine Type2-stroke
Bore x Stroke64.0 mm x 60.0 mm

Related product manuals