To Next Page

To Previous Page

10 SERVICE SCHEDULE 40

10.2 Service work (as additional order)

Annually

Every 80 operating hours/every 40 operating hours when used for motorsports

Every 40 operating hours

Once after 10 operating hours

Change the front brake fluid. ●

Change the rear brake fluid. ●

Change the hydraulic clutch fluid. ( p. 78) ●

Grease the steering head bearing. ( p. 64) ●

Check/set the carburetor components. ● ●

Perform a fork service. (EXC, XC‑W) ○ ● ●

Perform a fork service. (Six Days) ○ ● ●

Service the shock absorber. ● ●

Check the starter drive. (All 200/250/300 models) ● ●

Change the piston and check the cylinder. (All 125 models) ● ●

Change the piston and check the cylinder. (All 200/250/300 models) ●

Change the connecting rod, conrod bearing and crank pin. ●

Check the transmission and shift mechanism. ●

Change all engine bearings. ●

○ One-time interval

● Periodic interval

Questions and Answers:

Need help?

Do you have a question about the KTM 200 XC-W and is the answer not in the manual?

KTM 200 XC-W Specifications

General