13 SERVICE WORK ON THE CHASSIS 104
13.4 Mounting the passenger seat
401680-10
– Attach the hooks on the passenger seat to the brackets on the subframe, and lower at
the front while pushing toward the rear.
–
Insert locking pin
1
into the lock housing and push down the front of the passenger
seat until the locking pin engages with a click.
– Check that the passenger seat is correctly mounted.
13.5 Removing the driver's seat
Preparatory work
– Remove the passenger seat. ( p. 103)
G00575-10
Main work
– Raise the rear of the driver's seat.
– Detach the front of the driver's seat and remove it.
To Next Page
Loading...
