KTM 2014 1190 Adventure User Manual

21 STORAGE 196
21.1 Storage
Info
If you plan to garage the motorcycle for a longer period, perform the following steps or have them performed.
Before storing the motorcycle, check all parts for function and wear. If service, repairs or replacements are necessary, you should
do this during the storage period (less workshop overload). In this way, you can avoid long workshop waiting times at the start of the
new season.
401058-01
– When refueling for the last time before taking the motorcycle out of service, add fuel
additive.
Fuel additive ( p. 217)
– Refuel. ( p. 94)
– Clean the motorcycle. ( p. 192)
–
Change the engine oil and filter, clean the oil screens. x ( p. 185)
–
Check the coolant fill level and antifreeze. x
– Check the tire air pressure. ( p. 150)
–
Remove the battery. x ( p. 153)
Guideline
Storage temperature of battery without
direct sunshine
0… 35 °C (32… 95 °F)
–
Recharge the battery. x ( p. 157)
– Store the vehicle in a dry location that is not subject to large fluctuations in tempera-
ture.
(Option: Center stand)
– Raise the vehicle with the center stand. ( p. 102)
– Cover the vehicle with a tarp or similar cover that is permeable to air.

KTM 2014 1190 Adventure Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1195 cc
Bore x Stroke	105 mm x 69 mm
Compression Ratio	12.5:1
Torque	125 Nm @ 7500 rpm
Fuel System	Electronic Fuel Injection
Transmission	6-speed
Frame	Chromium-Molybdenum steel trellis frame, powder coated
Front Suspension	WP USD Ø 48 mm
Front Tire	120/70 ZR 19
Rear Tire	170/60 ZR 17
Dry Weight	217 kg
Fuel Capacity	23 liters
Power	150 hp (110 kW) @ 9500 rpm
Clutch	PASC slipper clutch, hydraulically operated
Front Brake	2 x Brembo 320 mm discs, 4-piston radial calipers
Rear Brake	Brembo 267 mm disc, 2-piston caliper
ABS	Bosch 9ME Combined ABS
Seat Height	860 mm