16 ELECTRICAL SYSTEM 169
S00298-10
–
Plug connector
2
into the new headlight bulb.
Low beam (H11/socket PGJ19-2) ( p. 207)
–
Position headlight bulb
1
into the bulb socket and turn it all the way clockwise.
The headlight bulb is locked into the bulb socket.
Finishing work
– Refit the headlight mask with the headlight. ( p. 167)
– Install the wind shield. ( p. 128)
–
Install the mask spoiler. x ( p. 121)
– Install the tank cover. ( p. 126)
– Install the front side cover. ( p. 117)
– Mount the driver's seat. ( p. 105)
– Mount the passenger seat. ( p. 104)
– Check the headlight setting. ( p. 172)
16.10 Changing the high beam bulb
Note
Damage to reflector Reduced brightness.
– Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
To Next Page
Loading...
