13 SERVICE WORK ON THE CHASSIS 123
G00581-11
–
Mount and tighten screw
5
.
Guideline
Screw, mask spoiler M5x17 3.5 Nm
(2.58 lbf ft)
– Repeat the operation on the opposite side.
Finishing work
– Install the tank cover. ( p. 126)
– Install the front side cover. ( p. 117)
– Mount the driver's seat. ( p. 105)
– Mount the passenger seat. ( p. 104)
13.20 Removing the front fender
S00356-10
–
Remove holder
1
from the front fender.
–
Remove screws
2
.
– Remove the fender in a forward direction.
Info
Pay attention to the brake lines.
To Next Page
Loading...
