KTM 2014 1190 Adventure - Pressure; Clock;Date

7 COMBINATION INSTRUMENT 64
7.9.19 "Pressure"
401842-14
Condition
• The vehicle is stationary.
– Press the UP or DOWN button until the "Settings" menu appears on the matrix display.
Pressing the SET button opens the menu.
– Press the UP or DOWN button until ">Pressure" is highlighted in black on the matrix dis-
play. Pressing the SET button again sets the unit of measure.
Select "bar" or "psi" for the tire pressure display.
7.9.20 "Clock/Date"
401990-01
Condition
• The vehicle is stationary.
– Press the UP or DOWN button until the "Settings" menu appears on the matrix display.
Pressing the SET button opens the menu.
– Press the UP or DOWN button until "Clock/Date" is highlighted in black on the matrix dis-
play. Pressing the SET button again opens the menu.
– Use the UP or DOWN button to navigate through the menu. Use the SET button to set
the time and date.
If the battery was disconnected, the time and date must be set in the matrix display.