13 SERVICE WORK ON THE CHASSIS 115
– Check the steering head bearing and adjust if necessary.
13.14 Removing the bottom triple clamp cover
202248-12
–
Remove screws
1
.
– Plug out the horn.
–
Remove the triple clamp cover
2
.
13.15 Installing the bottom triple clamp cover x
202248-13
–
Position the triple clamp cover
1
.
– Plug in the horn.
–
Mount and tighten screws
2
.
Guideline
Remaining chassis screws M6 10 Nm (7.4 lbf ft)
To Next Page
Loading...
