EasyManua.ls Logo

KTM 450 SMR 2021 - Removing the Main Silencer

KTM 450 SMR 2021
139 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11 SERVICE WORK ON THE CHASSIS
58
F01027-01
Main work
– Wash the air filter thoroughly in special cleaning liquid and
allow it to dry properly.
Air filter cleaner ( p. 128)
Info
Only press the air filter to dry it, never wring it out.
– Oil the dry air filter with a high-grade air filter oil.
Oil for foam air filter ( p. 128)
– Clean the air filter box.
– Clean the intake flange and check it for damage and tightness.
Finishing work
– Install the air filter. ( p. 57)
– Install the air filter box cover. ( p. 56)
11.27 Removing the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
– Allow the exhaust system to cool down before performing any work on the vehicle.
E01966-10
–
Detach spring
1
.
Spring hook (50305017000C1)
E01967-10
–
Remove screws
2
with the washers and take off the main
silencer.

Table of Contents