EasyManua.ls Logo

KTM 450 SMR 2021 - 14 Electrical System 14; Removing the 12-V Battery

KTM 450 SMR 2021
139 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ELECTRICAL SYSTEM 14
91
14.1 Removing the 12-V battery
Warning
Risk of injury12 V batteries contain harmful substances.
Keep 12 V batteries out of the reach of children.
Keep sparks and open flames away from 12 V batteries.
Only charge 12 V batteries in well-ventilated rooms.
Maintain a minimum clearance from inflammable materials when charging 12 V batteries.
Minimum clearance 1 m (3 ft)
Do not charge deeply discharged 12 V batteries if the charge is already below the minimum voltage.
Minimum voltage before the start of the charge 9 V
Dispose of 12 V batteries with less than the minimum voltage correctly.
Preparatory work
Remove the seat. ( p. 55)
S02336-10
Main work
Hang the voltage regulator to the side.
Disconnect negative cable
1
from the 12-V battery.
Pull back positive terminal cover
2
and disconnect positive
cable
3
from the 12-V battery.
Remove screw
4
.
Pull holding bracket
5
forward and take out the 12 V battery
upwards.

Table of Contents