KTR ROTEX GS - Page 36

KTR Kupplungstechnik
GmbH
D-48407 Rheine
ROTEX
®
GS
Operating/mounting instructions
KTR-N
Sheet:
Edition:
45510 EN
36of36
15
Please note protection
mark ISO 16016.
Drawn: 15.10.12 Pz Replaced for: KTR-N valid from 08.02.12
Verified: 29.10.12 Pz Replaced by:
5 Enclosure A
Hints and Instructions Regarding the Use in Hazardous Areas
5.8
EC Certificate
of Conformity
EC Certificate of Conformity
Corresponding to EC Standard 94/9/EC dated 23 March1994
and to the legal regulations
The manufacturer - KTR Kupplungstechnik GmbH, D-48432 Rheine – states that the
ROTEX



GS backlash-free shaft couplings
described in these mounting instructions and explosion-proof designed correspond to Article 1 (3) b) of
Standard 94/9/EC and comply with the general Safety and Health Requirements according to
enclosure II of Standard 94/9/EC.
The ROTEX
®
GS coupling is in accordance with the specifications of the standard 94/9/EC. One or
several standards mentioned in the corresponding EC type test certificate IBExU03ATEXB002_05 X
were in part replaced by updated versions.
KTR Kupplungstechnik GmbH as the manufacturer confirms that the product mentioned above is in
accordance with the specifications of the new standards, too.
According to article 8 (1) b) ii) of Standard 94/9/EC the technical documentation is desposited with the:
IBExU
Institut für Sicherheitstechnik GmbH
Fuchsmühlenweg 7
09599 Freiberg
Rheine, 15.10.12 i. V.
i. V.
Date Reinhard Wibbeling
Engineering Manager
Johannes Deister
Product Manager