-5SAFE OPERATION
ENGLISH
15.Always maintain the correct tire inflation pressure. Do
not inflate tires above the recommended pressure
shown in the Operator's Manual.
16.Securely support the machine when changing wheels.
17.Make sure that wheel bolts have been tightened to the
specified torque.
18.Escaping hydraulic fluid under pressure has sufficient
force to penetrate the skin causing serious personal
injury. Before disconnecting lines, be sure to relieve all
pressure. Before applying pressure to the system,
make sure all connections are tight and that lines,
pipes, and hoses are not damaged.
19.Fluid escaping from pinholes may be invisible. Use a
piece of cardboard or wood to search for suspected
leaks: do not use hands. Use safety goggles or other
eye protection.
If injured by escaping fluid, see a medical doctor at
once. Serious infection or reaction will result if proper
medical treatment is not administered immediately.
This fluid can produce gangrene or severe allergic
reaction.
20.Do not make adjustments or repairs with the engine
running.
21.Keep machine free of grass, leaves, or other debris
build-up.
22.Do not run a machine inside a closed area.
23.Waste products such as used oil, fuel, hydraulic fluid,
and batteries, can harm the environment, people, pets
and wildlife. Please dispose properly.
See your local Recycling Center or KUBOTA Dealer to
learn how to recycle or get rid of waste products.
1. Keep the machine and fuel supply in a secure area
and remove the key to prevent children or others from
playing or tampering with them.
2. Do not store the machine in an area that may ignite
fuel vapor. Allow the engine to cool before storing.
3. To avoid the danger of exhaust fume poisoning, do not
operate the engine in a closed building without
adequate ventilation.
4. To reduce fire hazards, clean the machine thoroughly
before storage. Dry grass and leaves around the
engine and mufflers may ignite.
(1) Cardboard
(2) Hydraulic line
(3) Magnifying glass
7. STORAGE
To Next Page
Loading...
