PERIODIC SERVICE54
ENGLISH
BCleaning Transmission Strainer
When changing the transmission fluid, remove and clean
completely the oil strainers with kerosene. Be careful not
to damage the strainer parts when installing.
A The fine filings in the oil could injure the component
parts of the hydraulic system, it has been precision
build to withstand high pressure that the suction line
end is provided within an oil strainer.
BChanging Rear Axle Differential Case
Fluid [4WD]
(See "LUBRICANTS, FUEL AND COOLANT" in
"MAINTENANCE" section.)
Remove the drain and filling port plug. After draining,
replace the drain plug and fill with new oil.
(1) Strainer
(1) Strainer
(2) O ring
(3) Suction pipe
Oil capacity 1.5 L
(1) Filling plug with dipstick
(2) Drain plug
(A) Oil level is acceptable within
the range.
To Next Page
Loading...
