Kubota F2890E - Speed Control Pedal; Differential Lock Pedal; Stopping

23OPERATING THE MACHINE
ENGLISH
BSpeed Control Pedal
To avoid serious injury or death:
A Do not operate if the machine moves on a level
ground with foot off Speed Control Pedal.
"FORWARD"
Depress the speed control pedal with the toe of your right
foot to move forward.
"REVERSE"
Depress the speed control pedal with the heel of your right
foot to move in reverse.
Depress the speed control pedal a little and you can drive
slowly.
To increase travel-speed, depress the speed control
pedal more until the desired speed is reached.
A When the parking brake is applied, the speed control
pedal is locked in the "NEUTRAL" position.
BDifferential Lock Pedal
To avoid serious injury or death:
A Do not drive at high speed or turn the machine
when the differential is locked. Release the lock
before making such a turn.
If 1 of the front wheels should slip, step on the differential
lock pedal. Then both wheels will turn together, reducing
slippage.
The differential lock is applied only when the pedal is
being depressed.
A If the "Differential Lock" will not release when the pedal
is released, alternately step the speed control pedal
forward and backward slightly.
A Do not apply the differential lock pedal when traveling
at high speed, or damage to the transmission may
result.
STOPPING
BStopping
1. Release the speed control pedal and depress the
brake pedal to stop the machine.
2. Slow the engine down.
3. Shift PTO lever to the "DISENGAGE" position.
4. Lower all attachments, and place all control levers in
their "NEUTRAL" positions.
5. Apply the parking brake, turn off the engine and
remove the key from the switch.
8. Depressing the Speed Control Pedal
(1) Speed control pedal (A) "FORWARD"
(B) "REVERSE"
(1) Differential lock pedal (A) "ENGAGE"
(B) "DISENGAGE"