PERIODIC SERVICE50
ENGLISH
BChecking and Adjusting Brake Pedal
To avoid serious injury or death:
A Park the machine on a firm and level surface.
A Stop the engine and chock the wheels before
checking the brake pedal.
A If the turn assist brake device is attached, adjust the
brake pedal. (See Instruction manual for Turn Assist
Brake Pedals.)
A If the speed set device is attached, remove the speed
set release rod before adjusting, and replace it after
adjusting. (See Instruction manual for Cruise Control.)
1. Release the parking brake.
2. Slightly depress the brake pedal and measure free
travel at the top of pedal stroke.
3. If adjustment is needed, loosen the lock nut and turn
the turnbuckle to adjust the rod length within
acceptable limits.
4. Retighten the lock nut.
Proper brake pedal free
travel
20 to 40 mm on the pedal
(1) Brake pedal (S ) Free travel
(1) Lock nut
(2) Turnbuckle
To Next Page
Loading...
