Kubota F2890E - Page 31

OPERATING THE ENGINE10
ENGLISH
4. Make sure that the PTO lever is in the
"DISENGAGED" position.
(1) PTO lever : "ENGAGED"
: "DISENGAGED"
5. Make sure that the speed control pedal
is in the "NEUTRAL" position.
(1) Speed control pedal (A) "FORWARD"
(B) "REVERSE"
6. Make sure that the hydraulic lift lever is
in the "NEUTRAL" position.
(1) Hydraulic lift lever : "DOWN"
: "NEUTRAL"
: "UP"
7. Set the throttle lever 1/2 way forward.
(1) Throttle lever : "FAST"
: "SLOW"
8. Insert the key into the key switch and
turn clockwise 1 notch.
Make sure the easy checker lights are
"ON".