Kubota GR1600EC2 - Tightening Torques

6-S5
GR1600EC2, WSM
ELECTRICAL SYSTEM
3. TIGHTENING TORQUES
Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts : See page G-9.)
W1012736
Item N·m kgf·m ft-lbs
Starter (C terminal nut) 5.9 to 11.8 0.6 to 1.2 4.3 to 8.7
Dynamo (stater nut) 39.2 to 44.1 4.0 to 4.5 28.9 to 32.5
KiSC issued 07, 2006 A