Kubota GR1600EC2 - Safety Switch

6-S12
GR1600EC2, WSM
ELECTRICAL SYSTEM
(5) Safety Switch
PTO Switch
1. Remove the battery.
2. Remove the fender.
3. Disconnect the connector from the PTO switch (1).
4. Measure the resistance with an ohmmeter between the
terminals.
5. If the PTO switch is defective, replace it.
W10158610
Brake Switch
1. Remove the battery.
2. Remove the fender.
3. Disconnect the connector from the brake switch (1).
4. Measure the resistance with an ohmmeter between the
terminals.
5. If the brake switch is defective, replace it.
W10413270
Resistance (between
terminal a and b)
When plunger is
pushed
0 Ω
When plunger is
released
Infinity
Resistance (between
terminal c and d)
When plunger is
pushed
0 Ω
When plunger is
released
Infinity
(1) PTO Switch
(2) PTO Lever
a to d :Safety Switch Terminal
Resistance (between
terminal a and b)
When plunger is
pushed
0 Ω
When plunger is
released
Infinity
Resistance (between
terminal c and d)
When plunger is
pushed
0 Ω
When plunger is
released
Infinity
(1) Brake Switch a to d :Safety Switch Terminal
KiSC issued 07, 2006 A