Kubota GR1600EC2 - Special Tools for Machine

G-43
GR1600EC2, WSM
G GENERAL
Crankshaft Bearing 1 Replacing Tool
Application: Use to press out and press fit the crankshaft bearing 1.
[Press Out]
[Press Fit]
W78965412
[2] SPECIAL TOOLS FOR MACHINE
Relief Valve Pressure Tester
Code No.: 07916-50045
Application: This allows easy measurement of relief set pressure.
W1026741
Hydrostatic Transmission Tester and HST Adaptor Set
Code No.: 07916-52040 (Hydrostatic Transmission Tester)
07916-53072 (HST Adaptor Set)
Application: This allows easy measurement of hydrostatic
transmission pressure.
W1023682
A 135 mm (5.31 in.)
B 72 mm (2.83 in.)
C 40 mm radius (1.57 in. radius)
D 10 mm (0.39 in.)
E 22 mm (0.87 in.)
F 20 mm dia. (0.79 in. dia.)
G 47.90 to 47.95 mm dia. (1.8858 to 1.8878 in. dia.)
H 43.90 to 43.95 mm dia. (1.7283 to 1.7303 in. dia.)
A 130 mm (5.12 in.)
B 72 mm (2.83 in.)
C 40 mm radius (1.57 in. radius)
D 9 mm (0.35 in.)
E 24 mm (0.95 in.)
F 20 mm dia. (0.79 in. dia.)
G 68 mm dia. (2.68 in. dia.)
H 39.90 to 39.95 mm dia. (1.5709 to 1.5728 in. dia.)
(1) Gauge (07916-50322)
(2) Cable (07916-50331)
(3) Threaded Joint (07916-50401)
(4) Threaded Joint (07916-50341)
(5) Adaptor B (M18 × P1.5)
(07916-50361)
(6) Adaptor C (PS3/8) (07916-50371)
(7) Adaptor D (PT1/8) (07916-50381)
(8) Adaptor E (PS3/8) (07916-50392)
(9) Adaptor F (PF1/2) (07916-62601)
(10) Adaptor 58 (PT1/4) (07916-52391)
(1) Hydrostatic Transmission Tester
(07916-52040)
(2) Gasket (04714-00200)
(3) Connector 3 (07916-51331)
(4) Vacuum Gauge (07916-51331)
(5) Pressure Gauge (Low Pressure)
(07916-51301)
(6) Pressure Gauge (High Pressure)
(in Relief Valve Set Pressure Tester)
(07916-50321)
(7) HN Tube (in Relief Valve Set
Pressure Tester) (07916-50331)
(8) Valve Seat Driver (07916-60841)
(9) Connector 1 (07916-60811)
(10) Connector 2 (07916-60821)
(11) Long Connector (07916-60831)
(12) Adaptor 1 (07916-52621)
(13) Adaptor 2 with Collar
(07916-52632)
(14) Adaptor 3 with Collar
(07916-52642)
(15) HST Adaptor Set (07916-53072)
KiSC issued 07, 2006 A