RT120Q Operator’s Manual Transport - 97
Haul
Load
1. Fasten and adjust seat belt with seat facing forward.
2. Tilt steering column down.
3. Start tractor. See page 84 for proper start-up procedures.
4. Raise attachments, but keep them low and centered. Check that they are not in float.
5. Release parking brake and verify that parking brake indicator is off.
6. Move ground drive switch to low.
7. Slow engine to low throttle and slowly drive tractor onto trailer.
8. Position tractor on trailer deck for proper weight distribution.
9. Set parking brake and verify that parking brake indicator is on.
10. Lower attachments to trailer bed and turn tractor off. See page 87 for proper shutdown procedures.
11. Attach chains to tractor and attachments where tiedown decals are located. See page 93.
Crushing weight. If load falls or moves it could kill or crush
you. Stay away.
To help avoid injury:
• Attach trailer to tow vehicle before loading or unloading.
• Load and unload trailer on level ground.
• Block trailer wheels.
• Put ground drive control into neutral. Turn off ignition. Set parking brake.
Rollover could kill or crush. Wear seat belt.
275-303
To Next Page
Loading...
Need help?
General
