G-23
07-E3B SERIES, WSM
G GENERAL
[9] CHECK POINTS OF EVERY 3000 HOURS
Checking Turbocharger (for V2607-DI-T-E3B / V3007-DI-T-E3B /
V3307-DI-T-E3B)
(Turbine Side)
1. Check the exhaust port (2) and inlet port (4) side of turbine
housing (3) to see if there is no exhaust gas leak.
2. If any gas leak is found, retighten the bolts and nuts or replace
the gasket ((1) or (5)) with new one.
(Compressor Side)
1. Check the inlet hose (9) of the compressor cover (6) to see if
there is no air leak.
2. If any air leak is found, change the clamp band (7) and / or inlet
hoses (9).
3. Check the intake hose (8) and the clamp band (7) to see if there
is not loose or crack.
4. If any loose or crack is found, tighten the clamp band (7) or
change the hose ((8) or (9)) to prevent dust from entry.
(Radial Clearance)
1. If the wheel contact to the housing, replace the turbocharger
assembly with new one.
W1022082
(1) Gasket
(2) Exhaust Port
(3) Turbine Housing
(4) Inlet Port
(5) Gasket
(6) Compressor Cover
(7) Clamp Band
(8) Intake Hose
(9) Inlet Hose
To Next Page
Loading...
Need help?
General