10-18
KDFX Reference
KDFX Algorithm Specifications
an almost reverse reverberation, set Build Env to 100%. You can think of Build Env as
setting the position of a see-saw. The left end of the see-saw represents the driving of the
reverberation at the earliest time, the pivot point as driving the reverberation at mid-point
in the time sequence, and the right end as the last signal to drive the reverberator. At
settings near 0%, the see-saw is tilted down on the right: the reverberation starts abruptly
and the drive drops with time. Near 50%, the see-saw is level and the reverberation is
repetitively fed during the entire build time. At settings near 100%, the see-saw is tilted
down on the left, so that the reverberation is hit softly at first, and then at increasing level
until the end of the build time.
To Next Page
Loading...
