Kurzweil K2661 - Signal Flow of Complex Echo

KDFX Reference
KDFX Algorithm Specifications
10-27
Also at the input to the delays are 1 pole (6dB/oct) lopass filters controlled by the HF Damping parameter.
Figure 10-6 Signal flow of Complex Echo
Parameters
Page 1
Page 2
Wet/Dry 0 to 100 %wet Out Gain Off, -79.0 to 24.0 dB
Feedback 0 to 100 % L Diff Dly 0 to 100 ms
FB2/FB1>FB 0 to 100 % R Diff Dly 0 to 100 ms
HF Damping 16 to 25088 Hz Diff Amt 0 to 100 %
L Fdbk1 Dly 0 to 2600 ms R Fdbk1 Dly 0 to 2600 ms
L Fdbk2 Dly 0 to 2600 ms R Fdbk2 Dly 0 to 2600 ms
Delay
Pan
Pan
Pan
Pan
Pan
Pan
Delay
L Input
R Input
L Output
R Output
Feedback FB2/FB1 > FB
FB1 FB2
FB2FB1
L Tap Levels
R Tap Levels
Out Gains
Diffuser
Diffuser
Blend
Blend