EasyManua.ls Logo

Kurzweil K2661 - Graphic EQ; Dual Graphic EQ; Dual Mono 10 Band Graphic Equalizer; Filter Response of each Bandpass Filter

Kurzweil K2661
500 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10-238
KDFX Reference
KDFX Algorithm Specications
968 Graphic EQ
969 Dual Graphic EQ
Dual mono 10 band graphic equalizer
PAUs: 3
The graphic equalizer is available as stereo (linked parameters for left and right) or dual mono
(independent controls for left and right). The graphic equalizer has ten bandpass lters per channel. For
each band the gain may be adjusted from -12 dB to +24 dB. The frequency response of all the bands is
shown in the Figure 1. The dual graphic equalizer has a separate set of controls for the two mono channels
(see Stereo Graphic Equalizer).
Figure 10-125 Filter Response of Each Bandpass Filter
Like all graphic equalizers, the lter response is not perfectly at when all gains are set to the same level
(except at 0 dB), but rather has ripple from band to band (see Figure 2). To minimize the EQ ripple, you
should attempt to center the overall settings around 0 dB.
20
10
0
Amp
(dB)
31 62 125 250 500 1000 160002000 4000 8000
Freq (Hz)

Table of Contents

Other manuals for Kurzweil K2661

Related product manuals