KDFX Reference
KDFX Algorithm Specifications
10-231
Figure 10-122 LFO Shapes available for Dual AutoPanner
Parameters
Page 1
Page 2
Page 3
In/Out When set to “In” the auto-panner is active; when set to “Out” auto-panner is bypassed.
Out Gain The overall gain or amplitude at the output of the effect.
LFO Rate The speed of the panning motion.
Origin The axis for the panning motion. At 0%, panning excursion will be centered at the center
of the listening speakers. Positive values shift the axis to the right, while negative values
shift it to the left. At -100% or +100%, there is no room for panning excursion.
Pan Width The amount of auto pan excursion. This value represents the percentage of total panning
motion available after Origin is set.
CentrAtten Amount the signal level is dropped as it is panned through the center of the listening
stereo speaker array. For the smoothest tracking, a widely accepted subjective reference is
L In/Out In or Out R In/Out In or Out
L Out Gain Off, -79.0 to 24.0 dB R Out Gain Off, -79.0 to 24.0 dB
L LFO Rate 0 to 10.00 Hz L LFO Shape Tri
L RateScal 1 to 25088 x L PlseWdth 0 to 100 %
L Origin -100 to 100 %
L PanWidth 0 to 100 %
L CentrAtt 0 to 100 % L
L C R
R LFO Rate 0 to 10.00 Hz R LFO Shape Tri
R RateScal 1 to 25088 x R PlseWdth 0 to 100 %
R Origin -100 to 100 %
R PanWidth 0 to 100 %
R CentrAtt 0 to 100 % R
L C
Sine Saw+ Saw- Pulse Tri Expon
PulseWidth
To Next Page
Loading...
