12-36
Triple Modular Processing
K2661 Triple Programs: Controller Assignments
K2661 Triple Programs: Controller Assignments
The following tables describe the controller assignments for the 10 ROM-base triple programs
provided with v2. Table 12-1 lists a series of MIDI Controller numbers and their default and/or
generic functions within triples. Table 12-2 lists each triple program and the specific assignments
for each MIDI controller number in Table 12-1.
MIDI Controller Number Default Function
MWheel MIDI01) Pitch Modulation
Data (MIDI06) Filter Attack Time
MIDI22 Filter Decay Time
MIDI23 Filter Frequency
MIDI24 Amplitude Release Time
MIDI25 Filter Resonance
MIDI26 LFO Depth (filter layers1–3, PWM layers 4–6)
MIDI27 Delay Wet/Dry
MIDI28 Reverb Wet/Dry
MIDI29 Switches Saws to PWM oscillator
Table 12-1 Default controller functions for triple programs
Program ID Program Name MIDI Controller Assignment
730 Shores of Tripoli
MWheel Sawtooth wave pitch
Data Lowpass filter frequency
MIDI22 LP filter resonance (max --> min)
MIDI23 Crossfade: partials / sawtooth
MIDI24 Lowpass filter frequency (post-Saw)
MIDI25 Shaper amount
MIDI26 Resonant lowpass filter frequency
MIDI27 Bass rolloff, treble boost (via FX)
MIDI28 Reverb wet/dry & reverb time
MIDI29 Attack envelope control
Table 12-2 Controller assignments for v2 factory triple programs
To Next Page
Loading...
