Kurzweil K2661 - Various Shaper Curves Used in the Spectral Multi-Taps; Parameters for Spectral 4-Tap

KDFX Reference
KDFX Algorithm Specifications
10-39
Figure 10-10 Various shaper curves used in the Spectral Multi-Taps
Parameters for Spectral 4-Tap
Page 1
Page 2
Wet/Dry 0 to 100 % Out Gain Off, -79.0 to 24.0 dB
Fdbk Level 0 to 100 % Tempo System, 0 to 255 BPM
HF Damping 16 to 25088 Hz Diff Delay 0 to 20.0 ms
LF Damping 16 to 25088 Hz Diff Amt -100 to 100 %
LoopLength On or Off Tap2 Delay 0 to 32 bts
Fdbk Image -100 to 100 % Tap2 Shapr 0.10 to 6.00 x
Tap1 Delay 0 to 32 bts Tap2 Pitch C-1 to C8
Tap1 Shapr 0.10 to 6.00 x Tap2 PtAmt 0 to 100%
Tap1 Level 0 to 100 % Tap2 Level 0 to 100%
Tap1 Bal -100 to 100 % Tap2 Bal -100 to 100%
0.20x0.10x 0.50x
1.00x 2.00x 6.00x