Kurzweil K2661 - Parameters for Dual Res Filter

KDFX Reference
KDFX Algorithm Specifications
10-157
Parameters for Dual Res Filter
Page 1
Page 2
Wet/Dry The amount of filtered (wet) signal relative to unaffected (dry) signal.
Out Gain The overall gain or amplitude at the output of the filter.
FilterType The type of resonant filter to be used. May be one of “Lowpass”, “Highpass”, “Bandpass”,
or “Notch”.
Frequency The frequency of the resonant filter peak (or notch) in Hz. The frequencies correspond to
semitone increments.
Resonance The resonance level of the resonant filter. Resonance sets the level of the resonant peak (or
the amount of cut in the case of the notch filter).
L Wet/Dry 0 to 100%wet R Wet/Dry 0 to 100%wet
L Output Off, -79.0 to 24.0 dB R Output Off, -79.0 to 24.0 dB
L FiltType Lowpass R FiltType Highpass
L Freq 58 to 8372 Hz R Freq 58 to 8372 Hz
LResonance 0 to 50 dB RResonance 0 to 50 dB