10-102
KDFX Reference
KDFX Algorithm Specifications
Mid Gain The amount of boost or cut that the mid parametric filter should apply in dB. Every
increase of 6 dB approximately doubles the amplitude of the signal. Positive values boost
the signal at the specified frequency. Negative values cut the signal at the specified
frequency. [MonoDistort + EQ and StereoDistort+EQ]
Mid Freq The center frequency of the mid parametric filter in intervals of one semitone. The boost or
cut will be at a maximum at this frequency. [MonoDistort + EQ and StereoDistort+EQ]
Mid Wid The bandwidth of the mid parametric filter may be adjusted. You specify the bandwidth
in octaves. Small values result in a very narrow filter response. Large values result in a
very broad response. [MonoDistort + EQ and StereoDistort+EQ]
To Next Page
Loading...
