KDFX Reference
KDFX Algorithm Specifications
10-125
Page 2
Page 3
Page 4
Rotor 1 is a rotating speaker model on a budget. Its most attractive feature is its small size (one PAU).
Obviously a few things had to be scaled back. There is no vibrato/chorus model and no distortion control.
There is only a single rotating driver rather than a pair for high and low frequency bands. Aside from these
omissions, the rotating speaker model is quite full featured. It includes full control of the rotating speaker
including speed, size for Doppler shift, tremolo, acoustic beam width, cabinet lowpass filter and resonance
and full microphone control for two microphone positions.
Xover 8 to 25088 Hz
Lo Rate -10 to 10 Hz Hi Rate -10 to 10 Hz
Lo Size 0 to 250 mm Hi Size 0 to 250 mm
Lo Trem 0 to 100% Hi Trem 0 to 100%
Hi Beam W 45.0 to 360.0 deg
LoMic Lvls 0 to 100%
LoMicA Pos -180.0 to 180.0 deg LoMicB Pos -180.0 to 180.0 deg
HiMic Lvls 0 to 100%
HiSlow>Fst 0.10 to 10.00 s
HiMicA Pos -180.0 to 180.0 deg HiMicB Pos -180.0 to 180.0 deg
HiResonate 0 to 100%
Hi Res Dly 10 to 2550 samp
HiResXcurs 0 to 510 samp
Res HiPhs 0.0 to 360.0 deg
To Next Page
Loading...
