KDFX Reference
KDFX Algorithm Specifications
10-169
Wet/Dry The relative amount of input signal and effected signal that is to appear in the
final effect output mix. When set to 0%, the output is taken only from the input
(dry). When set to 100%, the output is all wet.
Out Gain The overall gain or amplitude at the output of the effect.
Pitch The fundamental pitch imposed upon the input. Values are in MIDI note
numbers.
Ptch Offst An offset from the pitch frequency in semitones. This is also available for
adding an additional continuous controller mod like pitch bend.
All other parameters These parameters control the exact shape of the frequency response of Pitcher.
An exact description of what each one does is, unfortunately, impossible, since
there is a great deal of interaction between them. For examples, examine the
figures above.
To Next Page
Loading...
