EasyManua.ls Logo

Kurzweil K2661 - Page 267

Kurzweil K2661
500 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
KDFX Reference
KDFX Algorithm Specications
10-185
Page 2
Parameters (MutualFreqOffset):
Page 1
Page 2
Wet/Dry The amount of modulated (wet) signal relative to the unaffected (dry) signal as a percent.
Out Gain The overall gain or amplitude at the output of the effect.
In Lowpass A rst-order lowpass lter is provided to reduce the bandwidth of the input signal.
Considering the many new frequency components that will be created, the lowpass lter
may help tame the sound. MutualFreqOffset has separate controls for left and right input
channels.
OffsetFreq Frequency Offset algorithm only. The frequency when multiplied with Offs Scale which
is the modulation frequency. The offset or modulation frequency is the frequency in Hz
which is added to and/or subtract from all the frequencies of the input signal.
Offs Scale Frequency Offset algorithm only. A scale factor which is multiplied with the OffsetFreq
parameter to produce the offset or modulation frequency.
In Gain L/R MutualFreqOffset algorithm only. Two independent gain controls (left and right) to
adjust the amplitude of the input signals. (See Wet Gain.)
Wet Gain The gain or amplitude of the modulated (wet) signal. The Wet Gain parameter and the In
Gain L/R parameters are for the MutualFreqOffset algorithm which produces an output
based on multiplying the left and right inputs. This is very different from adding signals,
and controlling levels can be tricky. Ideally you would set the input gains and the wet gain
so that the signal level remains at when you adjust Wet/Dry while ensuring you hear no
internal clipping. Use Out Gain for overall level control.
DwnOffsLvl The level of the down modulated signal. Negative values polarity invert the signal.
UpOffsLvl The level of the up modulated signal. Negative values polarity invert the signal.
OffsetFreq 0.00 to 10.00 Hz
Offs Scale 1 too25088x
DwnOffsLvl 0 to 100 % UpOffsLvl 0 to 100 %
DwnOffsPan -100 to 100 % UpOffsPan -100 to 100 %
Wet/Dry 0 to 100 %wet Out Gain Off, -79.0 to 24.0 dB
In Gain L Off, -79.0 to 24.0 dB Wet Gain Off, -79.0 to 24.0 dB
In Gain R Off, -79.0 to 24.0 dB
InLowpassL 8 to 25088 Hz InLowpassR 8 to 25088 Hz
DwnOffsLvl 0 to 100 % UpOffsLvl 0 to 100 %
DwnOffsPan -100 to 100 % UpOffsPan -100 to 100 %

Table of Contents

Other manuals for Kurzweil K2661

Related product manuals