KDFX Reference
KDFX Algorithm Specifications
10-213
MakeUpGain Provides an additional control of the output gain. The Out Gain and MakeUpGain
controls are additive (in decibels) and together may provide a maximum of 24 dB boost to
offset gain reduction due to compression or expansion.
Bass Gain The amount of boost or cut that the bass shelving filter should apply to the low frequency
signals in dB. Every increase of 6 dB approximately doubles the amplitude of the signal.
Positive values boost the bass signal below the specified frequency. Negative values cut
the bass signal below the specified frequency. [Comp/Exp + EQ only]
Bass Freq The center frequency of the bass shelving filter in intervals of one semitone. [Comp/Exp +
EQ only]
Treb Gain The amount of boost or cut that the treble shelving filter should apply to the high
frequency signals in dB. Every increase of 6 dB approximately doubles the amplitude of
the signal. Positive values boost the treble signal above the specified frequency. Negative
values cut the treble signal above the specified frequency. [Comp/Exp + EQ only]
Treb Freq The center frequency of the treble shelving filter in intervals of one semitone. [Comp/Exp
+ EQ only]
Mid Gain The amount of boost or cut that the mid parametric filter should apply in dB. Every
increase of 6 dB approximately doubles the amplitude of the signal. Positive values boost
the signal at the specified frequency. Negative values cut the signal at the specified
frequency. [Comp/Exp + EQ only]
Mid Freq The center frequency of the mid parametric filter in intervals of one semitone. The boost or
cut will be at a maximum at this frequency. [Comp/Exp + EQ only]
Mid Wid The bandwidth of the mid parametric filter may be adjusted. You specify the bandwidth
in octaves. Small values result in a very narrow filter response. Large values result in a
very broad response. [Comp/Exp + EQ only]
To Next Page
Loading...
