EasyManua.ls Logo

Kval Commander - Front Section Does Not Function Properly; Front Section Is Not Turned on at the Control Panel; The Six Shooter Is Not Moved Fully to the Right; The through Beam Lenses Are Dirty

Default Icon
72 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
This page contains Kval, Inc. proprietary information and is not to be duplicated or disclosed to unauthorized persons.
55
FRONT SECTION DOES NOT FUNCTION
PROPERLY
FRONT SECTION IS NOT TURNED ON AT THE CONTROL PANEL:
1. The front section will not operate if the front/back/both selector switch at the
control panel is not turned to either front or both. Check to ensure that this
switch is properly selected.
THE SIX SHOOTER IS NOT MOVED FULLY TO THE RIGHT:
1. The front section will not operate if the Six Shooter has not been rolled all the
way to the right at its home position and makes contact with the limit switch
located at the upper right corner of the Six Shooter track frame.
THE THROUGH BEAM LENSES ARE DIRTY:
1. In order for any of the photo eyes or through beams to operate correctly they
must be clean. Wipe off any dirt, grime, or saw dust and check for operation
again.

Table of Contents