26
By default, the TV-Hub’s wireless settings are
configured for the following:
• Wireless Mode: AP (Access Point)
• SSID: TV-Hub-<TV-Hub serial number>
• IP Address: 172.16.0.1
• Security Mode: Off
KVH requires that you select the WPA_PSK
security mode as shown in Figure 44 and assign a
unique password to prevent unauthorized access
to the TV-Hub (at the web interface, go to
Settings > Network Settings). If you keep the
default settings, you’re allowing anyone to access
the TV-Hub with their mobile device.
Figure 44: TV-Hub Security and Password Setting
KVH strongly recommends that you keep the
TV-Hub set to AP (Access Point) wireless
mode. If you select IF (Infrastructure) mode to
connect the TV-Hub to your onboard
network, you will no longer be able to access
the TV-Hub’s web interface directly.
IMPORTANT!
Secure the Wi-Fi Connection
18
To Next Page
Loading...
Need help?
General
